Plus Co2 Jet
SKU#: CFX1202
#: Plus Co2 Jet Co2 Cannon
SPECIFICATIONS.
FAQ
Video


LCD DMX CO2 JET

Plus CO2 JET

DMX small cryo CO2 jet cannon   

SPECIFICATIONS.

Product NamePlus Co2 Jet
Model

CFX1202

Voltage220 VAC 50/60HZ (110 VAC Available)
Power200W
Size (L x W x H)28 x 18 x 13 cm / Packing Size: 31cm x 28cm x 28cm
Weight

6.5 kg

Control way

DMX512/Manual (Power on/off)

DMX Channels2 CH (CH1=jet. CH2=jet time 1-3 seconds)
CO2 Jet burst Height6-8 meters (depend on the gas pressure)
Nozzle materialsABS
CO2 gas shot angleadjustable 0-100 degree
Pressure ratingUp to 1100 psi (75.84 bar) liquid CO2 gas
Hose length6 meters with quick connector or Custom Lengths available
DownloadsPlus CO2 JET MANUAL

DMX LCD Plus Co2 Jet

Plus Co2 Jet is the upgraded model Co2 Jet of CstarFX Basic Co2 Jet. Its LCD Panel lends for easy DMX addressing and Powercon power connections allows for daisy-chained power between units. From Events to Concerts, Private Parties to Festivals, the Plus Co2 Jet will get the job done.

HEIGHT:
Approx 6-8 metres

Consumables:
Liquid CO2 gas

Flame oil cans.jpg

DURATION:

CO2 Burst more 1.25 Minutes per CO2 Tank 50 lb.(Pound)


Plus Co2 Jet is the upgraded version of the Basic Co2 Jet. Adding an LCD panel and Powercon power connection ports, this upgraded version not only cuts time significantly when DMX addressing, but also adds the ability to daisy chain power between units without running multiple power cords and cube taps or splitters. While in DMX mode, can be controlled by a DMX 512 controller utilizing 2 channels; 1 channel of DMX for on/off control and the 2nd channel of DMX for the length of "ON" before the jet automatically shuts off. While in "Standard" mode, this cryo jet can be controlled by any on/off switch to the power supply feeding power to the unit. (Example: power strip on/off button being used to turn the cryo jet on/off when jet is plugged into the power strip and is in Standard mode). Plus Co2 Jet is lightweight and has the capabilities to be linked to other units for simultaneous control of multiple jets. This Cryo Jet comes in 110vAC and 220vAC with ability to be installed on truss or used on floor. Built to withstand rugged conditions, the Plus Co2 Jet reaches heights of 25'-35', or more, feet (7.6-10.6 meters) and weighs only 8.2 Lbs (3.7Kg). With easy assembly, included manual and high pressure Co2 hose, and quick setup time, you will be ready to use this Co2 Jet in minutes, pending you already have Co2. Compatible with both high and low pressure systems. Co2 is not included.

Carbon Package.jpg

CFX2201_4.jpg

CFX2202_FIX.png

The hose and Co2 Jet listed here have quick connect fittings already installed so you can easily disconnect the hose from the Co2 Jet when not in use. Electricity is required for this package. Simply connect the hose to the Co2 Jet and the other end of the hose to your Co2 tank. Then connect your DMX cable to the Co2 Jet "In" jack and the other end to any DMX 512 controller, and your ready to go! On this unit, the DMX Switch allows you to turn DMX "on" (to use with DMX 512 controllers) or "off" to use as a standard Cryo Jet (controlled using a power switch where as the on/off ability comes from power being applied to the unit).

FAQ:


1: What kind of gas should I choose?

A: Liquid co2 gas.


2: Can I connect the machine to gas tank directly?

A: Yes, available


3: Can it jet burst more than 5-10 seconds?

A: We suggest customer choose DMX mode and jet 1-3 seconds. Long time jet will damage the valve.


4: Can I customize the extension CO2 connecting hose?

A: Yes, support customization


5: Can I choose Flight case packaging?

A: The standard packing way is carton box. 2IN1/4IN1/6IN1 flight case is optional. If need please contact us.


Service Process

storyline.jpg




Send your message to this supplier
Contact us
Your Name:
E-mail *
*
Telephone number*
Message/Comments:
*
SEND
239 PINGCHUAN ROAD,
YUELU DISTRICT,
CHANGSHA,CHINA
Phone: +86 1917 4866 851
Email: info@cstarfx.cn
FOLLOW US